Tungsten carbide burrs for high performance, ALU HC-NFE, cylindrical shape ZYAS with end cut

Tungsten carbide high-performance burr ALU cylindrical ZYAS end dia. 12x25mm shank dia. 6mm aluminium/non-ferrous metal HICOAT

Item number:: 21100595
EAN:: 4007220804117

Tungsten carbide high-performance burr ALU cylindrical ZYAS end dia. 12x25mm shank dia. 6mm aluminium/non-ferrous metal HICOAT 2

Technical data

Retailers-Search

Technical information

Tungsten carbide high-performance burr ALU cylindrical ZYAS end dia. 12x25mm shank dia. 6mm aluminium/non-ferrous metal HICOAT

Cut: ALU HC-NFE
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 2,559
Length, total: 65 mm
RPM from, hard non-ferrous metals: 16000 RPM
RPM from, soft non-ferrous metals: 16000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 16000 RPM
RPM to, hard non-ferrous metals: 34000 RPM
RPM to, soft non-ferrous metals: 34000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 34000 RPM
Packaging unit: 1 piece

Description

The use of burrs with the PFERD HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.

Cylindrical burr according to DIN 8032 with circumferential and end cut.

Advantages

Mainly used for long-chipping and lubricating non-ferrous metals.
Maximum stock removal rate.
Effective chip removal through improved anti-adhesion characteristics.
Lower thermal loads.
Increased tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.