Tungsten carbide burr set for general use, cut 3 PLUS

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut

Item number:: 21901507
EAN:: 4007220431498

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut 2

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut 3

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut 4

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut 5

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut 6

Technical data Change variant

Retailers-Search

Technical information

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut

Cut: 3 PLUS
Dia. shank: 6 mm
PFERD type: 1507 Z3 PLUS
Packaging unit: 1 piece

Description

Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Set 1507 – cut 3 PLUS – contains three tungsten carbide burrs in the most common shapes and dimensions for applications in the workshop. The sturdy plastic box protects the tools against dirt and damage.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burr set for general use, cut 3 PLUS

Tungsten carbide burr set 1507 cut 3 PLUS 3-piece dia. 12 mm shank dia. 6 mm universal medium cross cut

PFERD Newsletter subscription