Short belts felt

Polishing belt 40x760 mm for general polishing work with a pipe belt grinder

Technical information

Polishing belt 40x760 mm for general polishing work with a pipe belt grinder

Description

Suitable for polishing with polishing paste bars and grinding pastes on tubular constructions and railings.

Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Advantages

Recommendations for use

For the polishing process, apply pre-polishing and high-gloss polishing successively.
When changing the polishing paste, also replace the polishing belt in order not to introduce any contaminants from the previous work step.
For the best results, use at a recommended cutting speed of 5-15 m/s.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Downloads