POLIVLIES flap discs PVZ

POLIVLIES flap disc PVZ ceramic dia. 125 mm hole 22.23 mm CO-COOL120/A240F for fine grinding

Item number:: 44695113
EAN:: 4007220106389

POLIVLIES flap disc PVZ ceramic dia. 125 mm hole 22.23 mm CO-COOL120/A240F for fine grinding 2

POLIVLIES flap disc PVZ ceramic dia. 125 mm hole 22.23 mm CO-COOL120/A240F for fine grinding 3

POLIVLIES flap disc PVZ ceramic dia. 125 mm hole 22.23 mm CO-COOL120/A240F for fine grinding 4

Technical data Change variant

Retailers-Search

Choose options

Dia. external

115 mm 125 mm

Grit size

CO-COOL 60 / A 100 G CO-COOL 80 / A 180 M CO-COOL 120 / A 240 F

Packaging unit

Reset Filter

Technical information

POLIVLIES flap disc PVZ ceramic dia. 125 mm hole 22.23 mm CO-COOL120/A240F for fine grinding

Abrasive: CO-COOL
Dia. external: 125 mm
Dia. hole: 22.23 mm
Grit size: CO-COOL 120 / A 240 F
Max. RPM: 12200 RPM
Mounting system: Centre hole
RPM, optimum, from: 4600 RPM
RPM, optimum, to: 5300 RPM
Width: 18 mm
Packaging unit: 5 pieces

Description

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 240 F = fine (blue)

Advantages

High economic efficiency due to high abrasive performance and long tool life.
Creates a consistently high surface quality over the entire tool life, as new sharp abrasive is steadily released.
Highly flexible, enabling optimal adjustment to the contour.

Recommendations for use

For the best results, use at a recommended cutting speed of 30-35 m/s.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams