Hard felt flap disc FFS dia. 115 mm M14 for polishing work with an angle grinder

Technical information

Dia. external: 115 mm
Dia. thread: M14
Max. RPM: 8350 RPM
PFERD type: FFS 115/M14 HART
RPM, optimum: 1650 RPM
Version: H (hard)
Packaging unit: 5 pieces

Description

Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components.

Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained. As a general rule, diamond polishing pastes and polishing paste bars are used for this.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Can be profiled as desired, meaning they can also be used for tools with complex geometries.
Low thermal load on the workpiece.

Recommendations for use

Use the hard version for pre-polishing of even surfaces. If very fine finishes need to be achieved, the hard and soft versions can be used successively.

Materials that can be worked: Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Thermoplastics; Titanium; Titanium alloys

Applications: Polishing

Drive types: Angle grinder; Cordless angle grinder

Downloads

Felt flap discs

Hard felt flap disc FFS dia. 115 mm M14 for polishing work with an angle grinder

PFERD Newsletter subscription