End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Item number:: 43216001
EAN:: 4007220659199

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm

Dia. filament material

0.2 mm 0.3 mm

Filament material

Stainless steel wire (INOX) Steel wire (ST)

Reset Filter

Technical information

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Dia. cup: 10 mm
Dia. external: 10 mm
Dia. filament material: 0.2 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 20 mm
Length, total: 4-3/4
Length, total: 120 mm
Max. RPM: 20000 RPM
Mounting system: Shank
RPM, optimum, from: 4000 RPM
RPM, optimum, to: 9500 RPM
Packaging unit: 10 pieces

Description

Suitable for light brushing such as deburring, cleaning and derusting.

Particularly long version to access deep areas.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Optimal access to hard-to-reach areas.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/52 RS PGAS 4/52 RS

Robot spindles for stationary application PWAS 4/52 RS PWAS 4/52 RS

End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm steel wire dia. 0.20

Matching tool drive

PFERD Newsletter subscription