diamond cut-off wheel D1A1R 75x2.0x10.0mm D357 (coarse) with protective segment for GRP/CRP

Technical information

diamond cut-off wheel D1A1R 75x2.0x10.0mm D357 (coarse) with protective segment for GRP/CRP

Blade thickness: 1 mm
Dia. external: 75 mm
Dia. hole: 10 mm
Grit size: D 357
Protective segment per side: 3
Shape: G
Width: 2 mm
Packaging unit: 1 piece

Description

Electroplated diamond cut-off wheels are used for both wet and dry grinding.

Electroplated diamond cut-off wheels are used for cutting hard materials such as tungsten carbide or ceramics and fibre-reinforced plastics (GRP/CRP).

They are characterized by their particularly efficient cutting performance because of their large chip spaces.

Advantages

The continuous coating with protective segments facilitates optimum free-cutting.

Recommendations for use

The coarse grit size D 357 is suitable for cutting pre-sintered ceramic, and trimming and cutting fibre-reinforced plastics (GRP/CRP) to size.

Ordering notes

Customer-specific tool solutions are available on request.

Materials that can be worked: Fibre-reinforced thermosetting plastics (GRP, CRP); Technical ceramics

Applications: Cutting; Cutting out holes; Trimming

Drive types: Drive spindle; Flexible shaft drive; Robot; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends diamond cut-off wheels for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.