diamond cut-off wheel D1A1R 125x1.4x20.0mm D151 (medium) for glass/ceramic/tungsten carbide

Technical information

Blade thickness: 1 mm
Dia. external: 125 mm
Dia. hole: 20 mm
Grit size: D 151
Protective segment per side: no
Shape: D
Width: 1.4 mm
Packaging unit: 1 piece

Description

Electroplated diamond cut-off wheels are used for both wet and dry grinding.

Electroplated diamond cut-off wheels are used for cutting hard materials such as tungsten carbide or ceramics and fibre-reinforced plastics (GRP/CRP).

They are characterized by their particularly efficient cutting performance because of their large chip spaces.

Advantages

The continuous coating is particularly suitable for very fine separating cuts.

Recommendations for use

The fine grit size D 151 is suitable for cutting glass, ceramic and tungsten carbide. For small geometries, it is also suitable for trimming and cutting fibre-reinforced plastics (GRP/CRP) to size.

Ordering notes

Customer-specific tool solutions are available on request.

Materials that can be worked: Abrasive materials; Fibre-reinforced thermosetting plastics (GRP, CRP); Glass; Technical ceramics; Tungsten carbide

Applications: Cutting; Cutting out holes; Trimming

Drive types: Angle grinder; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends diamond cut-off wheels for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

PFERDERGONOMICS

recommends diamond cut-off wheels as an innovative tool solution to sustainably reduce the dust produced during use.

Downloads

Diamond cut-off wheels shape 1A1R GAD