cloth ring TR hard dia. 150x10mm centre hole dia. 20mm for pre-polishing with polishing paste

Technical information

Description

Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes.

If the intention is to achieve very smooth surface finishes, use several or even all variants successively.

TH (hard cloth) version for pre-polishing.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Can be profiled as desired, meaning they can also be used for tools with complex geometries.

Recommendations for use

Pre-polishing of steel and INOX: Cloth rings TH with polishing paste PP 1 VP STEELOX.
Pre-polishing of aluminium and brass: Cloth rings TH with polishing paste PP 2 VP ALU.
Pre-polishing of non-ferrous metals: Cloth rings TH with polishing paste PP 3 VP NON-FERROUS.
Version TH cloth rings achieve their best performance at a recommended cutting speed of 10â€“15 m/s.

Ordering notes

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Downloads

Cloth rings with hole