Tungsten carbide burrs for high performance, EDGE, conical counterbore shape KSK EDGE,

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium

Item number:: 21115469
EAN:: 4007220098004

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium 2

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium 3

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium Youtube

Technical data Change variant

Retailers-Search

Choose options

Cut

EDGE EDGE ALU

Dia. external

16 mm

Length, cut

1 mm 3 mm

Reset Filter

Technical information

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium

Angle: 90 °
Cut: EDGE ALU
Dia. ball bearing: 10 mm
Dia. external: 16 mm
Dia. shank: 6 mm
Length, construction: 12 mm
Length, cut: 3 mm
Length, total: 2-3/64
Length, total: 52 mm
RPM from, hard non-ferrous metals: 12000 RPM
RPM from, soft non-ferrous metals: 18000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 12000 RPM
RPM to, hard non-ferrous metals: 22000 RPM
RPM to, soft non-ferrous metals: 22000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 22000 RPM
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Conical counterbore burr for the production of precisely defined chamfers. Suitable for counterboring and chamfering of defined 45° chamfer angles.

Advantages

Special design for precise guidance.
Safe and comfortable to guide.
Creates exact edge shapes in one single step.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Burr is interchangeable.

Recommendations for use

Use the burrs counterÂrotationally. In order to produce a fine surface, finally pass them over the edges in the direction of rotation.
If possible, use burrs with the EDGE cut with the PFERD compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Aluminium; Brass; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Thermoplastics; Zinc

Applications: Chamfering; Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the EDGE cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Tungsten carbide burrs for high performance, EDGE, conical counterbore shape KSK EDGE,

Tungsten carbide burr EDGE ALU conical KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges aluminium

PFERDEFFICIENCY

Matching tool drive

PFERD Newsletter subscription