POLIFAN flap discs ceramic oxide grain CO-FREEZE SG INOX ★★★☆

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel

Item number:: 67711580
EAN:: 4007220104125

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel 2

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel 3

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel 4

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel 5

Technical data Change variant

Retailers-Search

Choose options

Dia. external

115 mm 125 mm 180 mm

Grit size

36 50 80

Shape

PFC / B / T29 PFF / A / T27

Packaging unit

Reset Filter

Technical information

POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 80 SG INOX stainless steel

Abrasive: CO-FREEZE
Dia. external: 115 mm
Dia. hole: 22.23 mm
Grit size: 80
Max. RPM: 13300 RPM
Mounting system: Centre hole
Shape: PFC / B / T29
Packaging unit: 10 pieces

Description

The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.

POLIFAN flap disc specifically designed for stainless steel (INOX) with ultra-cool grinding. Due to the ceramic oxide grain CO with active grinding and cooling special coating (FREEZE), there is no heat discolouration (even in sub-optimal thermal conditions), so no reworking is required.

Advantages

The FREEZE coating significantly reduces heat build-up in the workpiece compared with standard flap discs.
Fast work progress and high economic efficiency thanks to the aggressive stock removal rate.
Maximum aggressiveness over the entire tool life.
Fewer tool changes due to the excellent tool life.
The usual flying sparks are minimized. Damage to stainless steel workpieces from flying glowing sparks is therefore almost entirely ruled out.

Recommendations for use

Even during the first use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an exceptional wear pattern after just a few seconds. The highly effective fillers form a shiny cooling film on the flaps (no "vitrification"). This provides the basis for ultra-cool grinding.

Materials that can be worked: Cobalt-based alloys; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Stainless steel (INOX)

Applications: Step-by-step fine grinding; Surface grinding; Work on weld seams

Drive types: Angle grinder; Drive spindle

PFERDVALUE

PFERDEFFICIENCY

recommends POLIFAN flap discs to achieve perfect results as quickly as possible.

PFERDERGONOMICS

recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust produced during use and to perceptibly improve comfort when working.