HSS step drill, HICOAT coating

step drill HSS 14 drilling steps dia. 4-30mm 3-surface shaft dia. 10mm HICOAT coated

Item number:: 25201043
EAN:: 4007220802762

step drill HSS 14 drilling steps dia. 4-30mm 3-surface shaft dia. 10mm HICOAT coated 2

Technical data Change variant

Retailers-Search

Technical information

step drill HSS 14 drilling steps dia. 4-30mm 3-surface shaft dia. 10mm HICOAT coated

Dia. shank: 10 mm
Drill steps: 4.0/6.0/8.0/10.0/12.0/14.0/16.0/18.0/20.0/22.0/24.0/26.0/28.0/30.0
Drilling range, from: 4 mm
Drilling range, to: 30 mm
Length, total: 3,937
Length, total: 100 mm
Number, drill steps: 14 pcs.
RPM from, rust and acid-resistant steels: 100 RPM
RPM from, soft non-ferrous metals: 200 RPM
RPM from, steels over 700 N/mm²: 100 RPM
RPM from, steels up to 700 N/mm²: 200 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 100 RPM
RPM to, rust and acid-resistant steels: 1600 RPM
RPM to, soft non-ferrous metals: 2400 RPM
RPM to, steels over 700 N/mm²: 1600 RPM
RPM to, steels up to 700 N/mm²: 2400 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 1600 RPM
Version: HC-FEP
Packaging unit: 1 piece

Description

HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft. HSS step drills with premium HICOAT coating HC-FEP are wear resistant and versatile as they can be used to process steel, stainless steel (INOX), non-ferrous metals, thermoplastics and duroplastics. Step drills with HICOAT coating HC-FEP provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.

Advantages

Drilling and deburring in a single step.
Completely smooth running and a high cutting performance.
The high-quality drill tip ensures effortless centring and drilling.
The tool taper makes it easier to pull back from drilled plates.
Chips which do not break are neatly removed as with a spiral drill.
Built-up edges and cold welding on the blades are prevented.

Recommendations for use

Use HSS step drills on sheets, pipes and profiles with a maximum thickness of 4 mm.
Step drills with a HICOAT coating can also be used without the addition of coolants.
Step drills with a HICOAT coating are especially well-suited to use on stainless steel (INOX).

Materials that can be worked: Aluminium; Brass; Bronze; Case-hardened steels; Cast steel; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; Wood; Zinc

Applications: Countersinking; Deburring; Drilling

Drive types: Column drill; Power drill

Downloads

Included in

HSS step drill set HICOAT SET STB HSS HC-FEP 3TLG

HSS step drill, HICOAT coating

step drill HSS 14 drilling steps dia. 4-30mm 3-surface shaft dia. 10mm HICOAT coated

Included in

PFERD Newsletter subscription