Tungsten carbide burrs for high performance, STEEL HC-FEP, cylindrical shape with radius end WRC

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel

WRC 1225/6 STEEL HC-FEP

Item number:: 21105390
EAN:: 4007220221570

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel 1

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel 2

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel 3

Technical data Change variant

Retailers-Search

Technical information

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel

Cut: STEEL HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 65 mm
RPM, hardened, heat-treated steels over 1,200 N/mm²: 12000 - 24000 RPM
RPM, steels up to 1,200 N/mm²: 12000 - 24000 RPM
Packaging unit: 1 piece

Description

High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

brochure-tc-burrs-steel-cut-2025-web-en.pdf

Included in

Tungsten carbide burr set for high performance, cut STEEL HC-FEP 1807 STEEL 3TLG HC-FEP

Matching tool drive

Robot spindles for stationary application PGAS 3/370 RS PGAS 3/370 RS

Tungsten carbide burrs for high performance, STEEL HC-FEP, cylindrical shape with radius end WRC

Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm HICOAT steel

WRC 1225/6 STEEL HC-FEP

Included in

Matching tool drive

PFERD TOOLSNewsletter subscription