Tungsten carbide high-performance burr ALU cylindrical with radius end WRC dia. 06x13mm shank dia. 3mm for aluminium/non-ferrous metals

Contact Us +34 945 184 400 pferd-es@pferd.com

Matching accessories & spare parts

Handpieces for RCK system

Handpieces for RCK system RCK GS 2/600 SP

Technical information

Tungsten carbide high-performance burr ALU cylindrical with radius end WRC dia. 06x13mm shank dia. 3mm for aluminium/non-ferrous metals

Cut: ALU
Dia. external: 6 mm
Dia. shank: 3 mm
Length, cut: 13 mm
Length, total: 43 mm
RPM, hard non-ferrous metals: 32000 - 59000 RPM
RPM, soft non-ferrous metals: 32000 - 59000 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 32000 - 59000 RPM
Packaging unit: 1 piece

Description

PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

Extremely high stock removal rate.
Large chips.
Reduced material adhesion.
Long tool life and smooth running.
Can be used with cutting speeds of up to 1,100 m/min.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

brochure-tc-burrs-alu-cut-2020-web-en.pdf

safety-pdf-cat-2-de-en.pdf

wzh26-catalogue-2-web-en-int.pdf

Included in

Tungsten carbide burr set for high performance, cut ALU

Tungsten carbide burr set for high performance, cut ALU SET 1603 ALU 10TLG

Matching tool drive

Robot spindles for stationary application PGAS 2/800 RS

Robot spindles for stationary application PGAS 2/800 RS PGAS 2/800 RS

Air-powered straight grinder PG 3/500

Air-powered straight grinder PG 3/500 PG 3/500 S

PFERD TOOLSNewsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.