Tungsten carbide burr conical pointed SKM dia. 06x18 mm shank dia. 6 mm Z3 universal medium

Technical information

Angle: 18 °
Cut: 3
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 18 mm
Length, total: 55 mm
RPM, grey cast iron, white cast iron: 24000 - 32000 RPM
RPM, hard non-ferrous metals: 13000 - 19000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 13000 - 19000 RPM
RPM, high-temperature-resistant materials: 13000
RPM, rust and acid-resistant steels: 13000 - 19000 RPM
RPM, soft non-ferrous metals: 24000 - 32000 RPM
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Special features

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 3, conical pointed shape SKM

Tungsten carbide burr conical pointed SKM dia. 06x18 mm shank dia. 6 mm Z3 universal medium

SKM 0618/6 Z3

Matching accessories & spare parts

Matching tool drive

PFERD TOOLSNewsletter subscription